8am-3pm Pacific Mon-Fri | 208-413-6377

X-Rings EPDM

EPDM X-Ring - Twice the Sealing Surface

X-Rings have a double sealing function as compared to an O-ring and can be used in a wide variety of static and dynamic sealing applications. The four-lobed design provides twice the sealing surface in comparison to a standard o-ring. The double-seal action requires less squeeze to maintain an effective seal. This reduction in squeeze means less friction and improved seal life. Additionally, X-Ring parting lines are between the lobes, away from the sealing surface. This eliminates the issue of leakage often resulting from a parting line's irregular surface as found on an O-Ring. X-Rings are measured by their Cross Section and I.D., just like o-rings.

Advantages of X-Rings vs. O-Rings

  • Avoid twisting in the groove. The seal does not tend to roll in the groove during reciprocating movement.
  • Low friction. It requires less radial squeeze than a comparable O-ring.
  • Less friction means less wear, and thus a longer service life.
  • Very good sealing efficiency due to it special profile.
  • A lubricant reservoir formed between the sealing lips improves start up

Size not listed, special requirements or large quantities please click this link to Request a Price Quote.



O-Rings