Window 7 users: Hit "log In" to see if your computer is secure and can view the HTTPS:// secure connection, SSL. If not, please call in your O-Ring order. 

8am-4pm Pacific Mon-Fri | 208-413-6377

ST210 Single Turn Split Teflon Backup Ring



$0.48

Quantity Discount
1-69
$0.48
70-416
$0.36
417+
$0.24

  • Model: ST210
  • 41 in Stock
  • Fits O-Ring Size -210
  • 0.118" W X 0.766"ID X 0.05"HT
  • 2.998mm W X 19.457mm ID X 1.27mm HT

AS568-210 (0.118" W X 0.766"ID X 0.05"HT)

Teflon PTFE Back-up Rings are designed to prevent extrusion in rubber O-ring sealing systems. The amount of this extrusion is affected by O-ring hardness, operating temperature, operating pressure and clearance of the mating surface.

Increased Pressure: The use of Back-up Rings should be considered for systems with operating pressure above 2000 PSI. At these pressures the mechanical forces applied to the O-Ring may cause extrusion of the O-ring into the clearance gap.

Operating temperature: The use of Back-up Rings should be considered for elevated temperatures greater than 160°F (71C). The physical and mechanical properties of O-rings may be affected at these temperatures, this increasing the risk of extrusion into the clearance gap.

Industrial Trends: Today's fluid power systems continue to move towards higher pressures and temperatures. Teflon PTFE Back-up Rings should be considered as a reliable component to achieve satisfactory system performance

Be the first to write a review.  Write a Review.

What are the most common O-ring compounds?

We stock O-Rings in over 20 different compounds and durometers the following six are the standard rubber materials in a range of durometers (Shore A) hardness to satisfy practically any service condition:

Buna-N O-Rings / Nitrile O-Rings / NBR: Nitrile (Buna-N) is the most widely used elastomer due to its excellent resistance to petroleum products, operating temperature range (-40°F to +257°F) and one of the best performance-to-cost values. It's an ideal material for aerospace, automotive, propane and natural gas applications. Special Hydrogenated Nitrile (HNBR) compounds can improve resistance to direct ozone, sunlight, and weather exposure while increasing temperature range to +300°F.
AS-568 Buna-N O-Rings | Metric Buna-N O-Rings

Viton® O-Rings / FKM: Fluorocarbon (Viton®) exhibits exceptional resistance to chemicals, oils, temperature extremes (-13°F to +446°F), low compression set, low gas permeability and excellent aging characteristics. Applications include: aircraft engines, automotive fuel handling systems, and chemical processing industries. FKM is also suitable for high vacuum applications. It is not recommended for exposure to ketones, alkalis, and Skydrol® fluids. Custom compounds are available with improved chemical and low temperature resistance.
AS-568 Viton® O-Rings | Metric Viton® O-Rings

Ethylene-Propylene / EPDM O-Rings: EPDM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (-40ºF to +275ºF); but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications.
AS-568 EPDM O-Rings | Metric EPDM O-Rings

Silicone O-Rings / VMQ: In the Silicone family, you will find compounds which are superior as static seals in extreme temperature conditions. Standard compounds handle operating temperatures -85º to +400ºF. Silicone compounds are popular in food and medical applications because they are very clean and do not impart odor or taste. Special Phenyl silicones can be used down to -148°F.
AS-568 Silicone O-Rings | Metric Silicone O-Rings

Neoprene® O-Rings / CR: Neoprene (-40º to +250ºF) is reasonably priced and features good resistance to petroleum oils, ozone, sunlight and oxygen aging, relatively low compression set, good resilience and outstanding physical toughness. It is the preferred sealing material for the refrigeration industry because of its resistance to ammonia and Freon®.
AS-568 Neoprene® O-Rings