8am-3pm Pacific Mon-Fri | 208-413-6377

Categories



-202 E70 EPDM O-Ring 70D General Purpose (Non-FDA)



$0.03

Qty Discounts Prices
17-1,249
$0.03
1,250-9,999
$0.02
10,000+
$0.01
Min:  17
  • Model: E70202-GP
  • 15673 in Stock
  • 1/4"ID X 1/2"OD X 1/8"CS
  • Actual: 0.234"ID X 0.139"CS
  • Metric: 5.94mm ID X 3.53mm CS

1/4"ID X 1/2"OD X 1/8"CS

EPDM (Ethylene Propylene, EPM) O-Rings

EPDM is a copolymer of ethylene and propylene. Ethylene propylene diene monomer (EPDM) is produced using a third monomer and is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base. Heat resistance-Up to 300°F (149°C) (max. 400°F (204°C) in water and/or steam).
Cold flexibility-Down to approximately –70°F (–57°C).

Chemical Resistance and Uses:

  • Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
  • Various Water / Municipalities Applications
  • Household Appliances
  • Glycol based brake fluids up to 300°F (149°C)
  • Many organic and inorganic acid
  • Cleaning agents, soda and potassium alkalis
  • Phosphate-ester based hydraulic fluids (HFD-R)
  • Silicone Oil and Grease
  • Many polar solvents (alcohols, ketones, esters)
  • Ozone, aging and weather resistant
  • Outdoor Applications
  • Electrical Insulators
  • EPDM rubber is used in extreme cold environment applications

EPDM is not recommended for:

  • Mineral oil products (oils, greases and fuels)
  • Solvents
  • Aromatic Hydrocarbons.
  • Liquefied Petroleum Gas (LPG)
  • Lubricating Oils, Petroleum Base
  • Gasoline

Compound Info:

  • Ethylene Propylene, EPDM, or EP (EP)
  • Color: Black
  • Duro: 70
  • FDA: No

Operating temperature: -65° to +300°F

  • (max. 400°F (204°C) in water and/or steam)

 

 

Be the first to write a review.  Write a Review.