8am-4pm Pacific Mon-Fri | 208-413-6377


AS568-114 Teflon Encapsulated O-Ring Viton Core


  • Model: TEV114
  • 25 in Stock
  • 5/8"ID X 13/16"OD X 3/32"CS
  • Actual: 0.612"ID X 0.103"CS
  • Metric: 15.54mm ID X 2.62mm CS
  • PDF Data Sheets

5/8"ID X 13/16"OD X 3/32"CS

Teflon® Encapsulated Viton O-Rings

A Teflon Encapsulated o-ring is a circular shaped seal with a round cross section consisting of two components, a Teflon® jacket and an internal (core) energizer, which imparts memory to the seal. The encapsulated O-ring is intended to close off potential leak paths between mating surfaces in both static and dynamic applications.

FEP Encapsulation

The most versatile when considering overall corrosion resistance, sealing capability and temperature. Temperature range -450°F to +400°F (-267°C to 205°C).

Viton Core

Viton ® Core with FEP Jacket This choice gives the best possible sealing characteristics due to the very low compression set value of the specially formulated Viton® core. Unless there are extreme high or low temperature involved, Viton ® core should be the first choice.

Teflon FEP Encapsulation with Viton® Core: 300F/149C to -10F/-23C

Be the first to write a review.  Write a Review.