7am-3pm Pacific Mon-Fri | 208-413-6377

Categories



Industrial Standard Aflas Duro 80 O-ring Kit 36-Size



$358.00

Quantity Discount Prices
1
$358.00
2-9
$322.20
10+
$268.50

  • Model: K436X36A80
  • 0 in Stock

Aflas 80 Industrial O-ring Kit

This kit contains a total of 436 83 Durometer O-Rings in 36 different sizes,
providing an extremely low cost per size value.

Most commonly known as Aflas®, Tetrafluoroethylene Propylene (FEPM or TFE/P) is a fluorinated rubber. It has excellent resistance to a wide variety of chemicals, both acids and bases. It works well at elevated temperatures and has very good resistance to petroleum fluids.

O-ring kit includes the following O-rings:

  • 25pc AS568-005 3/32"ID X 7/32"OD X 1/16"CS
  • 25pc AS568-006 1/8"ID X 1/4"OD X 1/16"CS
  • 25pc AS568-007 5/32"ID X 9/32"OD X 1/16"CS
  • 25pc AS568-008 3/16"ID X 5/16"OD X 1/16"CS
  • 25pc AS568-009 7/32"ID X 11/32"OD X 1/16"CS
  • 25pc AS568-010 1/4"ID X 3/8"OD X 1/16"CS
  • 25pc AS568-011 5/16"ID X 7/16"OD X 1/16"CS
  • 15pc AS568-012 3/8"ID X 1/2"OD X 1/16"CS
  • 10pc AS568-013 7/16"ID X 9/16"OD X 1/16"CS
  • 10pc AS568-014 1/2"ID X 5/8"OD X 1/16"CS
  • 10pc AS568-015 9/16"ID X 11/16"OD X 1/16"CS
  • 10pc AS568-016 5/8"ID X 3/4"OD X 1/16"CS
  • 10pc AS568-017 11/16"ID X 13/16"OD X 1/16"CS
  • 10pc AS568-018 3/4"ID X 7/8"OD X 1/16"CS
  • 15pc AS568-110 3/8"ID X 9/16"OD X 3/32"CS
  • 10pc AS568-111 7/16"ID X 5/8"OD X 3/32"CS
  • 10pc AS568-112 1/2"ID X 11/16"OD X 3/32"CS
  • 10pc AS568-113 9/16"ID X 3/4"OD X 3/32"CS
  • 10pc AS568-114 5/8"ID X 13/16"OD X 3/32"CS
  • 10pc AS568-115 11/16"ID X 7/8"OD X 3/32"CS
  • 10pc AS568-116 3/4"ID X 15/16"OD X 3/32"CS
  • 7pc    AS568-117 13/16"ID X 1"OD X 3/32"CS
  • 7pc    AS568-118 7/8"ID X 1-1/16"OD X 3/32"CS
  • 7pc    AS568-119 15/16"ID X 1-1/8"OD X 3/32"CS
  • 7pc    AS568-120 1"ID X 1-3/16"OD X 3/32"CS
  • 7pc    AS568-121 1-1/16"ID X 1-1/4"OD X 3/32"CS
  • 10pc AS568-210 3/4"ID X 1"OD X 1/8"CS
  • 10pc AS568-211 13/16"ID X 1-1/16"OD X 1/8"CS
  • 10pc AS568-212 7/8"ID X 1-1/8"OD X 1/8"CS
  • 7pc    AS568-213 15/16"ID X 1-3/16"OD X 1/8"CS
  • 7pc    AS568-214 1"ID X 1-1/4"OD X 1/8"CS
  • 7pc    AS568-215 1-1/16"ID X 1-5/16"OD X 1/8"CS
  • 7pc    AS568-216 1-1/8"ID X 1-3/8"OD X 1/8"CS
  • 7pc    AS568-217 1-3/16"ID X 1-7/16"OD X 1/8"CS
  • 7pc    AS568-218 1-1/4"ID X 1-1/2"OD X 1/8"CS
  • 7pc    AS568-219 1-5/16"ID X 1-9/16"OD X 1/8"CS

Aflas (Tetrafluoroethylene Propylene, FEPM)

AFLAS ® is the tradename for a unique fluoroelastomer based upon an alternating copolymer of tetrafluoroethylene and propylene ("TFE/P"). TFE/P provides improved chemical resistance to a wide spectrum of automotive fluids and additives. It is resistant to motor oils of all types, engine coolants with high level of rust inhibitors, extreme pressure (EP) gear lubricants, transmission and power steering fluids, and all types of brake fluids including DOT 3, mineral oil, and silicone oil. TFE/P is ideal for heat transfer media, amines, acids and bases, as well as hot water and steam up to +170°C (+340°F). AFLAS, when properly formulated, can be used to fabricate o-rings, gaskets, and seals possessing several unique properties:

  • Heat resistance-Up to approximately 450°F (232°C)
  • Cold flexibility-Down to approximately 25°F (–4°C)
  • Excellent heat resistance with 230°C continuous service temp capability
  • Chemical resistance including resistance to strong acids and caustics / bases
  • High Electrical Resistivity
  • Excellent Oil Resistance

Compatible with:

  • Bases
  • Phosphate esters
  • Amines
  • Engine oils
  • Steam to 350F
  • Pulp and paper liquors.
  • Brake Fluid
  • Steam to 350F
  • Automatic Transmission Fluid

Not compatible with:

  • Aromatic fuels
  • Ketones
  • Carbon tetrachloride
  • Methyl Isobutyl Ketone (MIBK)
  • Methyl Ethyl Ketone (MEK)

Temperature Range: -14°F - 428°F (10°C - 220°C)

Be the first to write a review.  Write a Review.