8am-3pm Pacific Mon-Fri | 208-413-6377

Categories



Industrial Standard Urethane Duro 70 O-ring Kit 36-Size



$95.00

Quantity Discount Prices
1
$95.00
2-9
$85.50
10+
$71.25

  • Model: K436X36U70
  • 4 in Stock

Urethane 70 Industrial O-ring Kit

This kit contains a total of 436 70 Durometer O-Rings in 36 different sizes, providing an extremely low cost per size value.

Polyurethane: EU Polyether Urethane

General Purpose EU Polyurethane rubber is notable for its combination of hardness with elasticity, outstanding abrasion resistance and tear strength. Elastomeric urethane rubber, not to be confused with thermoplastic polyurethane, is often referred to as the "millable gum" urethane. Polyurethane is a moderately expensive material whose use is usually limited to applications that require its outstanding physical properties. Common end use applications are industrial seals, Air Guns, Paintball Markers, pneumatic applications, and other high dynamic applications.

O-ring Kit Includes:

  • 25pc AS568-005 3/32"ID X 7/32"OD X 1/16"CS
  • 25pc AS568-006 1/8"ID X 1/4"OD X 1/16"CS
  • 25pc AS568-007 5/32"ID X 9/32"OD X 1/16"CS
  • 25pc AS568-008 3/16"ID X 5/16"OD X 1/16"CS
  • 25pc AS568-009 7/32"ID X 11/32"OD X 1/16"CS
  • 25pc AS568-010 1/4"ID X 3/8"OD X 1/16"CS
  • 25pc AS568-011 5/16"ID X 7/16"OD X 1/16"CS
  • 15pc AS568-012 3/8"ID X 1/2"OD X 1/16"CS
  • 10pc AS568-013 7/16"ID X 9/16"OD X 1/16"CS
  • 10pc AS568-014 1/2"ID X 5/8"OD X 1/16"CS
  • 10pc AS568-015 9/16"ID X 11/16"OD X 1/16"CS
  • 10pc AS568-016 5/8"ID X 3/4"OD X 1/16"CS
  • 10pc AS568-017 11/16"ID X 13/16"OD X 1/16"CS
  • 10pc AS568-018 3/4"ID X 7/8"OD X 1/16"CS
  • 15pc AS568-110 3/8"ID X 9/16"OD X 3/32"CS
  • 10pc AS568-111 7/16"ID X 5/8"OD X 3/32"CS
  • 10pc AS568-112 1/2"ID X 11/16"OD X 3/32"CS
  • 10pc AS568-113 9/16"ID X 3/4"OD X 3/32"CS
  • 10pc AS568-114 5/8"ID X 13/16"OD X 3/32"CS
  • 10pc AS568-115 11/16"ID X 7/8"OD X 3/32"CS
  • 10pc AS568-116 3/4"ID X 15/16"OD X 3/32"CS
  • 7pc    AS568-117 13/16"ID X 1"OD X 3/32"CS
  • 7pc    AS568-118 7/8"ID X 1-1/16"OD X 3/32"CS
  • 7pc    AS568-119 15/16"ID X 1-1/8"OD X 3/32"CS
  • 7pc    AS568-120 1"ID X 1-3/16"OD X 3/32"CS
  • 7pc    AS568-121 1-1/16"ID X 1-1/4"OD X 3/32"CS
  • 10pc AS568-210 3/4"ID X 1"OD X 1/8"CS
  • 10pc AS568-211 13/16"ID X 1-1/16"OD X 1/8"CS
  • 10pc AS568-212 7/8"ID X 1-1/8"OD X 1/8"CS
  • 7pc    AS568-213 15/16"ID X 1-3/16"OD X 1/8"CS
  • 7pc    AS568-214 1"ID X 1-1/4"OD X 1/8"CS
  • 7pc    AS568-215 1-1/16"ID X 1-5/16"OD X 1/8"CS
  • 7pc    AS568-216 1-1/8"ID X 1-3/8"OD X 1/8"CS
  • 7pc    AS568-217 1-3/16"ID X 1-7/16"OD X 1/8"CS
  • 7pc    AS568-218 1-1/4"ID X 1-1/2"OD X 1/8"CS
  • 7pc    AS568-219 1-5/16"ID X 1-9/16"OD X 1/8"CS

Polyurethane (EU) Recommended uses:

  • Mechanical Applications
  • Wear Resistance
  • Pure aliphatic hydrocarbons (propane, butane, fuel)
  • Mineral oil and grease
  • Silicone oil and grease
  • Water up to 125°F (50°C) (EU type only)
  • Ozone and aging resistant.

Polyurethane (EU) is Not Recommended for:

  • Ketones, esters, ethers, alcohols, glycols
  • Hot Water above 40°C and Water Vapor
  • Dilute Alkalis and Acids
  • Amines
  • Refined Mineral Oils
  • Organic Solvents such as Acetone

Operating temperature: -30° to +180°F

*Actual testing in the application environment is always recommended.

Be the first to write a review.  Write a Review.