ST-P4-BU Metric Teflon Back-Up Ring



$0.720

Qty Discounts Prices
1-199
$0.720
200-1,099
$0.650
1,100+
$0.440
  • Model: ST-P4-BU
  • 37 in Stock
Add to Cart:

1.5mm CS X 4mm ID X 7mm OD - “P” Series Metric Back-up Ring Sizes

Ring dimensions conform to Japanese Industrial Standard, JIS B 2407

PTFE Back-up Rings are designed to prevent extrusion in rubber O-ring sealing systems.  The amount of this extrusion is affected by O-ring hardness, operating temperature, operating pressure and clearance of the mating surface.

Increased Pressure:  The use of Back-up Rings should be considered for systems with operating pressure above 2000 PSI.  At these pressures the mechanical forces applied to the O-ring may cause extrusion of the O-ring into the clearance gap.

Operating temperature:  The use of Back-up Rings should be considered for elevated temperatures greater than 160 F(71C).  The physical and mechanical properties of O-rings may be affected at these temperatures, this increasing the risk of extrusion into the clearance gap.

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719