OSK™ SAE Boss O-Ring Kit 155 Piece Fluorocarbon FKM 90 Duro



$40.000

Qty Discounts Prices
1
$40.000
2-9
$32.000
10+
$30.000
  • Model: K155X8V90-900
  • 30 in Stock
Add to Cart:

OSK™ SAE Boss O-Rings Seal Kit

This Kit contains 155 pieces and 8 of the most popular 900 series O-Rings. These Boss Seal O-Rings are used in sealing straight thread tube fittings (Boss Type) in the design and service of hydraulic equipment.

The 900 series of dash numbers identifies the 20 sizes of boss seals. Except for size -901, the digits after the 9 identify the nominal tube size in 16ths of an inch. The tube size is its outside diameter (OD). For example, size -903 is intended for use with 3/16-inch tube. The one exception, size -901, is intended for use with 3/32-inch tube. 1/16-inch tube is not common in aircraft use.

OSK™ SAE Boss O-Rings Seal Kit Includes:

  • 15pc -903 Boss O-Rings Tube Size OD: 3/16", SAE Dash Size -3, Thread Size 3/8-24 UNF
  • 25pc -904 Boss O-Rings Tube Size OD: 1/4", SAE Dash Size -4, Thread Size 7/16-20 UNF
  • 15pc -906 Boss O-Rings Tube Size OD: 3/8", SAE Dash Size -6, Thread Size 9/16-18 UNF
  • 25pc -907 Boss O-Rings Tube Size OD: 7/16"
  • 25pc -908 Boss O-Rings Tube Size OD: 1/2", SAE Dash Size -8, Thread Size 3/4"-16 UNF
  • 25pc -910 Boss O-Rings Tube Size OD: 5/8", SAE Dash Size -10, Thread Size 7/8-14 UNF
  • 15pc -912 Boss O-Rings Tube Size OD: 3/4", SAE Dash Size -12, Thread Size 1-1/16-12 UN
  • 10pc -916 Boss O-Rings Tube Size OD: 1", SAE Dash Size -16, Thread Size 1-5/16-12 UN

Chemical Resistant and High Heat Fluorocarbon FKM O-Rings 90 Durometer:

Fluorocarbons (FKM) – commonly referred to as Fluorocarbon FKM, has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Fluorocarbon FKM has a temperature range of -20F to +400F, and provides excellent resistance to a wide variety of chemicals, weather and compression set requirements. The relatively high level of fluorine in Fluorocarbon FKM materials allows for exceptional resistance to chemical attack, but with limited low temperature capabilities.

Chemical Resistance:

  • Mineral oil and grease, low swelling in ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Hydraulic Oil, Petroleum Base
  • Non-flammable hydraulic fuels in the group HFD
  • Silicone oil and grease
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (fuel, butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride)
  • Chlorine Water
  • Gasoline, Fuels, also fuels with methanol content
  • Liquefied Petroleum Gas (LPG)
  • Natural Gas
  • Propane
  • Diesel Oil
  • High vacuum
  • Very good ozone, weather and aging resistance.

Not Compatible With:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Brake Fluid
  • Acetone
  • Super heated steam
  • Low molecular organic acids (formic and acetic acids)
  • Skydrol 500
  • Methyl Ethyl Ketone

Compound Info:

  • Dupont-Dow Fluorocarbon FKM, with exceptional chemical resistance
  • Color: Black
  • Duro: 90
  • FDA: No
  • ASTM M3HK910 A1-10 B38 EF31 EO78 Z=DUPONT FKM
  • Designed to meet or exceed the properties of these popular Fluorocarbon FKM Compounds:
    • V1007, V747-90, V700-90, V14-90, F-9001 and 9009-90

Operating temperature: -20° to +400°F

 

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719