OSK™ Standard O-Ring Kit EPDM FDA 382pc 30 Sizes



$29.000

Qty Discounts Prices
1-4
$29.000
5-24
$23.000
25+
$21.000
  • Model: K382X30E70
  • 1 in Stock
Add to Cart:

FDA Grade EPDM compound for ozone, water & UV service. Sulfur-Cured EPDM is the least costly and provides the best Tear and Abrasion Resistance compared to Peroxide-Cured Systems.  EPDM Compounds are frequently used with foods, water, steam applications, phosphate ester type hydraulic fluids, brake fluids and offer the best resistance to ozone and weathering.  EPDM's are not used with petroleum oils or fuels because significant swelling would result.

This kit contains a total of 382 O-Rings in 30 different sizes, providing an extremely low cost per size value.

O-Ring Kit includes the following O-Rings:

  • 20pc -006 1/8"ID X 1/4"OD X 1/16"CS
  • 20pc -007 5/32"ID X 9/32"OD X 1/16"CS
  • 20pc -008 3/16"ID X 5/16"OD X 1/16"CS
  • 20pc -009 7/32"ID X 11/32"OD X 1/16"CS
  • 20pc -010 1/4"ID X 3/8"OD X 1/16"CS
  • 20pc -011 5/16"ID X 7/16"OD X 1/16"CS
  • 20pc -012 3/8"ID X 1/2"OD X 1/16"CS
  • 13pc -110 3/8"ID X 9/16"OD X 3/32"CS
  • 13pc -111 7/16"ID X 5/8"OD X 3/32"CS
  • 13pc -112 1/2"ID X 11/16"OD X 3/32"CS
  • 13pc -113 9/16"ID X 3/4"OD X 3/32"CS
  • 13pc -114 5/8"ID X 13/16"OD X 3/32"CS
  •  13pc -115 11/16"ID X 7/8"OD X 3/32"CS
  •  13pc -116 3/4"ID X 15/16"OD X 3/32"CS
  •  10pc -210 3/4"ID X 1"OD X 1/8"CS
  •  10pc -211 13/16"ID X 1-1/16"OD X 1/8"CS
  •  10pc -212 7/8"ID X 1-1/8"OD X 1/8"CS
  •  10pc  -213 15/16"ID X 1-3/16"OD X 1/8"CS
  •  10pc  -214 1"ID X 1-1/4"OD X 1/8"CS
  •  10pc  -215 1-1/16"ID X 1-5/16"OD X 1/8"CS
  •  10pc  -216 1-1/8"ID X 1-3/8"OD X 1/8"CS
  •  10pc  -217 1-3/16"ID X 1-7/16"OD X 1/8"CS
  •  10pc  -218 1-1/4"ID X 1-1/2"OD X 1/8"CS
  •  10pc  -219 1-5/16"ID X 1-9/16"OD X 1/8"CS
  •  10pc  -220 1-3/8"ID X 1-5/8"OD X 1/8"CS
  •  10pc  -221 1-7/16"ID X 1-11/16"OD X 1/8"CS
  •  10pc  -222 1-1/2"ID X 1-3/4"OD X 1/8"CS
  •  7pc  -325 1-1/2"ID X 1-7/8"OD X 3/16"CS
  •  7pc  -326 1-5/8"ID X 2"OD X 3/16"CS
  •  7pc  -327 1-3/4"ID X 2-1/8"OD X 3/16"CS

FDA Compliant EPDM O-Rings:

Frequently used with foods, water, steam applications, phosphate ester type hydraulic fluids, brake fluids and offer great resistance to ozone and weathering. Sulfur-Cured FDA Grade EPDM is the least costly and provides the best tear and abrasion resistance compared to Peroxide-Cured Systems. EPDM's are not used with petroleum oils or fuels because significant swelling would result.

Chemical Resistance and Uses:

  • Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
  • Various Water / Municipalities Applications
  • Household Appliances
  • Glycol based brake fluids up to 300°F (149°C)
  • Many organic and inorganic acid
  • Cleaning agents, soda and potassium alkalis
  • Phosphate-ester based hydraulic fluids (HFD-R)
  • Silicone Oil and Grease
  • Many polar solvents (alcohols, ketones, esters)
  • Ozone, aging and weather resistant
  • Outdoor Applications
  • Electrical Insulators
  • EPDM rubber is used in extreme cold environment applications

Nitrile is not recommended for:

  • Mineral oil products (oils, greases and fuels)
  • Solvents
  • Aromatic Hydrocarbons.
  • Liquefied Petroleum Gas (LPG)
  • Lubricating Oils, Petroleum Base
  • Gasoline

Compound Info:

  • Ethylene Propylene, EPDM, or EP (EP)
  • Color: Black
  • Duro: 70
  • FDA: Yes, Meets the FDA standard requirements for food-handling applications.
  • ASTM D2000 Grade M5CA710 A25 B35 C32 EA14 F17 G21
  • FDA CFR 177.2600
  • Designed to meet or exceed the properties of these popular EPDM Compounds:
    • E603-70, E300-70, E1028-70, 3077, E14, E17016, 5601-70 and 559N

Operating temperature: -65° to +300F° 

  • (max. 400°F (204°C) in water and/or steam)
Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719