2mm X 15mm EPDM 70 O-ring General Purpose



$0.200

Qty Discounts Prices
10-233
$0.200
234-1,249
$0.150
1,250+
$0.120
Add to Cart:
Min Qty:  10

Cross Section "CS" X Inside Diameter "ID"

Metric EPDM O-rings (Ethylene Propylene, EPM) General Purpose

Ethylenepropylene-diene rubber (EPDM) is produced using a third monomer and is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base.

Heat Resistance:

  •  Up to 300°F (149°C) (max. 400°F (204°C) in water and/or steam).

Cold Flexibility:

  • Down to approximately –70°F (–57°C).

Chemical Resistance:

  •  Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
  •  Glycol based brake fluids up to 300°F (149°C)
  •  Many organic and inorganic acids
  •  Cleaning agents, soda and potassium alkalis
  •  Phosphate-ester based hydraulic fluids (HFD-R)
  •  Silicone oil and grease
  •  Many polar solvents (alcohols, ketones, esters)
  •  Ozone, aging and weather resistant.

Not Compatible With:

  •  Mineral oil products (oils, greases and fuels).
Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719