O-Ring Information

O-Ring Size Chart Chemical Resistance O-Ring Compounds O-Ring Cut Length

Categories

AS568 Standard Inch O-Rings ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro Standard ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA - Black ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA - White ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA / NSF61 ↪ Buna-N Nitrile O-Rings (NBR) 50 Duro Extra-Soft ↪ Buna-N Nitrile O-Rings (NBR) 90 Duro Extra Hard ↪ HNBR O-Rings (HSN) Hydrogenated Nitrile Green/Black ↪ Aflas® O-Rings 80 Durometer (FEPM, TFE/P) ↪ Buna-N Nitrile O-Rings (NBR) Mil-Spec MS28775 ↪ Buna-N O-Rings - Special Compounds ↪ Butyl Rubber (IIR) Compounds ↪ EPDM O-Rings FDA Grade for food, weather, water and general applications. ↪ EPDM O-Rings FDA/NSF-61 Chloramine Resistant Peroxide Cured O-Rings ↪ Ethylene Propylene O-Rings (EPDM) Special Compounds ↪ Fluorosilicone O-Rings (FVMQ) 70 Duro M25988/1 ↪ Fluorosilicone O-Rings (FVMQ) 75 Duro ↪ Hydraulic Boss O-Rings ↪ Metal Detectable O-Rings for Food & Pharmaceutical Industries ↪ Neoprene O-Rings (CR, Chloroprene) ↪ PTFE (AKA Teflon®) O-Rings 55 Duro Shore D ↪ Silicone O-Rings (VMQ) 70 Duro FDA ↪ Silicone O-Rings (VMQ) Special Compounds ↪ Simriz® FFKM Perfluoroelastomer O-Rings For Extreme Conditions ↪ Simriz 481 Low Temperature Black FFKM O-Rings ↪ Simriz 495 High Temp FFKM O-Rings ↪ -000 Series - 1/16" CS - 0.070" CS ↪ -100 Series - 3/32" CS - 0.103" CS ↪ -200 Series - 1/8" CS - 0.139" CS ↪ -300 Series - 3/16" CS - 0.210" CS ↪ -400 Series -1/4" CS - 0.275" CS ↪ -900 Series - Boss ↪ Simriz® 484 FDA USP Class VI & 3-A Perfluoroelastomer (FFKM) O-Rings ↪ Simriz® 485 FFKM O-Rings Equivalent to Chemraz® 562, Kalrez® 6230, Kalrez® 1050LF and Kalrez® 6375 temperatures below 230°C. ↪ Simriz® 486 USP Class VI, Semiconductor and Pharmaceutical White Perfluoroelastomer FFKM O-Rings ↪ Simriz® SZ498 The Ultimate FFKM Material High-Temperature & Chemical Resistant Perfluoroelastomer (FFKM) ↪ Square-Profile O-Rings - Square Cut Rings ↪ Teflon® Encapsulated O-Rings in Silicone, Viton® and EPDM ↪ Urethane O-Rings 70 Duro Disogrin® 6865 TODI ↪ Urethane O-Rings 90 Duro Disogrin 9251 TODI ↪ Urethane O-Rings EU 70 Durometer ↪ Urethane O-Rings EU 90 Durometer ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Black ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Brown ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Dark Green ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro FDA & 3A Sanitary ↪ Viton®/FKM Chemical Resistant O-Rings 90 Duro Black ↪ Viton®/FKM O-Rings 75 Duro ETP Extreme Chemical Resistant ↪ Viton®/FKM O-Rings 75 Duro Mil-Spec AS3209 M83248/1 ↪ Viton®/FKM O-Rings Special Compounds ↪ X-Ring Seals, (aka Quad-Ring®) ↪ Back-Up Rings for High-Pressure Extrusion Resistance Metric O-Rings OSK Assorted O-Ring Kits O-Ring Cord for Custom O-Rings Spliced & Vulcanized O-Rings Olypsys® Cell Phone O-Ring Measurement Hydraulic Seals O-Ring Lubrication Products Oil Seals - Shaft Seals OSK™ Air Nailer O-Ring Kits OSK™ Hydraulic Cylinder Seal Kits OSK™ Industrial Gaskets and Seals OSK™ O-Ring Repair Kits OSK™ Sanitary & Brewery Gaskets OSK™ Spray Foam O-Rings for Graco®Super Lube® Online Store Cam and Groove Gaskets AKA Camlock Gaskets OSK™ OEM Replacement O-Rings OSK™ Custom O-Rings & Kits Featured Products ...

Information

About Us Shop by Brand Shipping & Returns Privacy Notice Conditions of Use Contact Us Order Status Site Map Newsletter Unsubscribe O-Ring Quotes Made Effortless

Simriz 495 High Temp FFKM O-Rings

SZ487 Perfluoroelastomer (FFKM) Simriz® O-Rings

SZ487 is a 75-durometer, black, high temperature perfluoroelastomer. The operating temperature range is from -10°C to 300°C (-14°F to 572°F). Typical application environments are aggressive acids, bases and solvents. SZ487 can be used in place of Kalrez® compound 4079. Used in dry, high heat below 300C.

(image for) -000 Series - 1/16" CS - 0.070" CS

-000 Series - 1/16" CS - 0.070" CS

(image for) -100 Series - 3/32" CS - 0.103" CS

-100 Series - 3/32" CS - 0.103" CS

(image for) -200 Series - 1/8" CS - 0.139" CS

-200 Series - 1/8" CS - 0.139" CS

(image for) -300 Series - 3/16" CS - 0.210" CS

-300 Series - 3/16" CS - 0.210" CS

(image for) -400 Series -1/4" CS - 0.275" CS

-400 Series -1/4" CS - 0.275" CS

(image for) -900 Series - Boss

-900 Series - Boss

Copyright © 2025 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719