Buna-N O-Rings / Nitrile O-Rings / NBR: Made in the USA Nitrile 70 durometer black colored Buna N. Underwriter Laboratories approved list for use with gasoline, kerosene, fuel oils, LP Gas, Naphtha, manufactured and natural gas, and anhydrous ammonia. This compound exhibits a good balance of properties. The working temperature range for this compound is -20°F to 212°F with intermittent peaks to 250°F.
O-Ring Information
Categories
AS568 Standard Inch O-Rings ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro Standard ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA - Black ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA - White ↪ Buna-N Nitrile O-Rings (NBR) 70 Duro FDA / NSF61 ↪ Buna-N Nitrile O-Rings (NBR) 50 Duro Extra-Soft ↪ Buna-N Nitrile O-Rings (NBR) 90 Duro Extra Hard ↪ HNBR O-Rings (HSN) Hydrogenated Nitrile Green/Black ↪ Aflas® O-Rings 80 Durometer (FEPM, TFE/P) ↪ Buna-N O-Rings - Special Compounds ↪ Butyl Rubber (IIR) Compounds ↪ EPDM O-Rings FDA General-Purpose Sulfur-Cured O-Rings ↪ EPDM O-Rings FDA/NSF-61 Chloramine Resistant Peroxide Cured O-Rings ↪ Ethylene Propylene O-Rings (EPDM) Special Compounds ↪ Fluorosilicone O-Rings (FVMQ) 70 Duro M25988/1 ↪ Fluorosilicone O-Rings (FVMQ) 75 Duro ↪ Hydraulic Boss O-Rings ↪ Neoprene O-Rings (CR, Chloroprene) ↪ PTFE (AKA Teflon®) O-Rings 55 Duro Shore D ↪ Silicone O-Rings (VMQ) 70 Duro FDA ↪ Silicone O-Rings (VMQ) Special Compounds ↪ Simriz® FFKM Perfluoroelastomer O-Rings For Extreme Conditions ↪ Square-Profile O-Rings - Square Cut Rings ↪ Teflon® Encapsulated O-Rings in Silicone, Viton® and EPDM ↪ Urethane O-Rings 70 Duro Disogrin® 6865 TODI ↪ Urethane O-Rings 90 Duro Disogrin® 9251 TODI ↪ Urethane O-Rings EU 70 Durometer ↪ Urethane O-Rings EU 90 Durometer ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Black ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Brown ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro Dark Green ↪ Viton®/FKM Chemical Resistant O-Rings 75 Duro FDA & 3A Sanitary ↪ Viton®/FKM Chemical Resistant O-Rings 90 Duro Black ↪ Viton®/FKM O-Rings 75 Duro ETP Extreme Chemical Resistant ↪ Viton®/FKM O-Rings 75 Duro GFLT Based O-Rings ↪ Viton®/FKM O-Rings 75 Duro GLT Based M83485/1 (AMS-R-83485) ↪ Viton®/FKM O-Rings 75 Duro Mil-Spec AS3209 M83248/1 ↪ Viton®/FKM O-Rings Special Compounds ↪ X-Ring Seals, (aka Quad-Ring®) ↪ Back-Up RingsMetric O-Rings - ISO3601 Global O-RingsOSK™ Assorted O-Ring KitsO-Ring Cord for Versatile and Custom Sealing SolutionsVulcanized O-Rings - Precision Tailored to Your NeedsOlypsys® O-Ring Measurement App - How to Properly Measure O-Rings!Hydraulic Seals, Wipers, Rod Seals, Piston Seals, and Wear RingsO-Ring Lubrication ProductsOil Seals - Shaft SealsOSK™ Air Nailer O-Ring KitsOSK™ Hydraulic Cylinder Seal KitsOSK™ O-Ring Repair KitsOSK™ Sanitary & Brewery GasketsOSK™ Spray Foam O-Rings for Graco® and PMCOSK™ OEM Replacement O-RingsOSK™ Custom O-Rings & KitsFeatured Products ...
Important Links
Quality Policy ISO-9001:2015
AS568 O-Ring Information
How to Measure an O-Ring Like a Pro!
Experience the Future of O-Ring Measurement with Olypsys®
O-Ring Back-Up Ring Sizes
O-Ring Elastomers
Custom Labeled and Packaged Solutions
FDA and 3-A Sanitary O-Rings Food, Dairy & Water
O-Ring Groove Chart
Metric O-Ring Information
ASTM Specifications
O-Ring Groove Information - AS568
O-Ring Size Chart PDF
O-Ring Cord Information
Hydraulic Seal Information
® Site-Wide Trademark List
O-Ring Temperature Chart
O-Ring Shelf Life
RoHS & REACH Info
Quality Standards Manual
O-Ring Durometer - Why is Shore A Hardness Import?
- Home
- :: AS568 Standard Inch O-Rings
- :: Buna-N Nitrile O-Rings (NBR) Made in the USA
Buna-N Nitrile O-Rings (NBR) Made in the USA
There are no products to list in this category. |
---|
Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719