AS568-022 FDA EPDM 70 Duro Black X-Ring



$1.360

Qty Discounts Prices
1-99
$1.360
100-599
$1.230
600+
$0.820
  • Model: QE-022-23761
    Dimensions: 1"ID X 1 1/8"OD X 1/16"CS
    Actual: 0.989"ID X 0.070"CS
    Metric: 25.12mm ID X 1.78mm CS
  • 1,571 in Stock
Add to Cart:

1"ID X 1 1/8"OD X 1/16"CS

Compound 23761 is a 70 durometer black colored EPDM, it is certified by NSF under the "Drinking
Water System Components Program" Standard 61. This compound is formulated to be Chloramine
resistant and self lubricating. The formulation uses FDA approved ingredients. This compound
exhibits good resistance to heat and compression set. It will remain non brittle at low
temperatures. This compound is peroxide cured.

Original Properties

Modulus @ 100% Elongation: 345 psi
Tensile Strength: 2,319 psi 16.0 MPa
Ultimate Elongation: 328 %
Hardness, Shore A: 70 Durometer
Specific Gravity: 1.10 grams/cc
Brittleness Temperature: < -95 °F (< -71 °C)
TR-10 Temperature: -60 °F (-51 °C)
Tear Resistance, Die B: 194.0 ppi 34.0 kN/m
Tear Resistance, Die C: 164.0 ppi 28.7 kN/m

Chemical resistance:

  • Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
  • Glycol based brake fluids up to 300°F (149°C)
  • Many organic and inorganic acids
  • Cleaning agents, soda and potassium alkalis
  • Phosphate-ester based hydraulic fluids (HFD-R)
  • Silicone oil and grease
  • Many polar solvents (alcohols, ketones, esters)
  • Ozone, aging and weather resistant.

Not compatible with:

  • Mineral oil products (oils, greases and fuels).
Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719