O-Ring Information

O-Ring Size Chart Chemical Resistance O-Ring Compounds O-Ring Cut Length

Categories

AS568 O-Rings Standard Inch Metric O-Rings - ISO 3601 OSK™ Assorted O-Ring Kits O-Ring Cord - Extruded Rubber Precision Vulcanized O-Rings - Tailored to Your Needs Olypsys® O-Ring Measurement Hydraulic Seals, Wipers, Rod Seals, Piston Seals, and Wear Rings O-Ring Lubrication Products Oil Seals - Shaft Seals ↪ Simmerring® BABSL AS with Spring ↪ Single Lip No Pressure ↪ TB-H Oil Seals ↪ Type SA Oil Seals ↪ Type SC - Oil Seals ↪ Type SC Metric - Oil Seals ↪ Shaft OD - 4.00mm ↪ Shaft OD - 5.00mm ↪ Shaft OD - 6.00mm ↪ Shaft OD - 7.00mm ↪ Shaft OD - 8.00mm ↪ Shaft OD - 9.00mm ↪ Shaft OD - 10.00mm ↪ Shaft OD - 11.00mm ↪ Shaft OD - 12.00mm ↪ Shaft OD - 13.00mm ↪ Shaft OD - 14.00mm ↪ Shaft OD - 15.00mm ↪ Shaft OD - 16.00mm ↪ Shaft OD - 17.00mm ↪ Shaft OD - 18.00mm ↪ Shaft OD - 19.00mm ↪ Shaft OD - 20.00mm ↪ Shaft OD - 21.00mm ↪ Shaft OD - 22.00mm ↪ Shaft OD - 23.00mm ↪ Shaft OD - 24.00mm ↪ Shaft OD - 25.00mm ↪ Shaft OD - 26.00mm ↪ Shaft OD - 27.00mm ↪ Shaft OD - 28.00mm ↪ Shaft OD - 29.00mm ↪ Shaft OD - 30.00mm ↪ Shaft OD - 31.00mm ↪ Shaft OD - 32.00mm ↪ Shaft OD - 33.00mm ↪ Shaft OD - 34.00mm ↪ Shaft OD - 35.00mm ↪ Shaft OD - 36.00mm ↪ Shaft OD - 37.00mm ↪ Shaft OD - 38.00mm ↪ Shaft OD - 39.00mm ↪ Shaft OD - 40.00mm ↪ Shaft OD - 41.00mm ↪ Shaft OD - 42.00mm ↪ Shaft OD - 43.00mm ↪ Shaft OD - 44.00mm ↪ Shaft OD - 45.00mm ↪ Shaft OD - 46.00mm ↪ Shaft OD - 47.00mm ↪ Shaft OD - 48.00mm ↪ Shaft OD - 49.00mm ↪ Shaft OD - 50.00mm ↪ Shaft OD - 51.00mm ↪ Shaft OD - 52.00mm ↪ Shaft OD - 53.00mm ↪ Shaft OD - 54.00mm ↪ Shaft OD - 55.00mm ↪ Shaft OD - 56.00mm ↪ Shaft OD - 57.00mm ↪ Shaft OD - 58.00mm ↪ Shaft OD - 59.00mm ↪ Shaft OD - 60.00mm ↪ Shaft OD - 61.00mm ↪ Shaft OD - 62.00mm ↪ Shaft OD - 63.00mm ↪ Shaft OD - 65.00mm ↪ Shaft OD - 66.00mm ↪ Shaft OD - 68.00mm ↪ Shaft OD - 69.00mm ↪ Shaft OD - 70.00mm ↪ Shaft OD - 72.00mm ↪ Shaft OD - 73.00mm ↪ Shaft OD - 74.00mm ↪ Shaft OD - 75.00mm ↪ Shaft OD - 76.00mm ↪ Shaft OD - 78.00mm ↪ Shaft OD - 80.00mm ↪ Shaft OD - 82.00mm ↪ Shaft OD - 85.00mm ↪ Shaft OD - 88.00mm ↪ Shaft OD - 89.00mm ↪ Shaft OD - 90.00mm ↪ Shaft OD - 92.00mm ↪ Shaft OD - 95.00mm ↪ Shaft OD - 96.00mm ↪ Shaft OD - 98.00mm ↪ Shaft OD - 100.00mm ↪ Type TB - Oil Seals ↪ Type TC - Oil Seals ↪ Type TC Metric - Oil Seals ↪ Type VM Oil Seals ↪ VH-H ↪ Type SB-H Oil Seals ↪ Type PSA Seals OSK™ Air Nailer O-Ring Kits OSK™ Brewery Gaskets and Seals OSK™ Hydraulic Cylinder Seal Kits OSK™ O-Ring Repair Kits OSK™ Sanitary Gaskets and Seals OSK™ Spray Foam O-Rings for Graco® and PMC OSK™ OEM Replacement O-Rings OSK™ Custom O-Rings & Kits Specials ...Featured Products ...

Information

About Us Shipping & Returns Privacy Notice Conditions of Use Contact Us Site Map Newsletter Unsubscribe Quote Request Form

Product 4/11

58X78X13SC Type SC Nitrile Metric Oil Seal

58X78X13SC Type SC Nitrile Metric Oil Seal

Reveal product description/tech specs

Shaft OD X Bore ID X Seal Width - Type SC Metric Oil Seal

Nitrile Rubber Single Lip R21 / SC Oil Seals

An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R21 / SC style oil seal. This is a single sealing lip seal arrangement.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel and are often coated in a very thin layer of Nitrile rubber to assist sealing in the housing. The principle function of the metal case is to impart rigidity and strength to the seal.
The spring is made from SAE 1050-1095 Carbon Spring Steel which has a protective zinc coating. The principle function of the spring is to maintain an even gripping pressure around the shaft
Select your Shaft OD from below and purchase your oil seal online.

$10.930

Qty Discounts Prices
1-9 $10.930	10-49 $9.840	50+ $8.200

Model: 58X78X13SC
0 in Stock

Add to Cart:

Copyright © 2023 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719