42X55X9TC Nitrile TC Metric Oil Seal



$8.750

Qty Discounts Prices
1-9
$8.750
10-49
$7.880
50+
$6.570
  • Model: 42X55X9TC
  • 0 in Stock
Add to Cart:

Shaft OD X Bore ID X Seal Width - Type TC Metric Oil Seal

Nitrile Rubber Double Lip R23 / TC Oil Seals

An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)

NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40° Cto 120° C. It also functions well under dry environment, but only for intermittent periods.

TC Style Oil SealCross section of an R23 / TC style oil seal.

This is a double sealing lip seal arrangement with one primary sealing lip and a dust protection lip.

Construction

The seal cases are made from SAE 1008-1010 Carbon Steel and are often coated in a very thin layer of Nitrile rubber to assist sealing in the housing.
The principle function of the metal case is to impart rigidity and strength to the seal.

The spring is made from SAE 1050-1095 Carbon Spring Steel which has a protective zinc coating.
The principle function of the spring is to maintain an even gripping pressure around the shaft .

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719