AS568-214 GV75 Chemical Resistant Fluorocarbon FKM O-Rings Green

O-ring Size: 1"ID X 1 1/4"OD X 1/8"CS

Chemical Resistant Fluorocarbon FKM O-Rings:

Fluorocarbon FKM rubber has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately –15°F (–26°C) although in certain situations it is suitable down to –40°F (–40°C). Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (–15°C and –18°C). Gas permeability is very low and similar to that of butyl rubber.

Heat resistance

  • Up to 400°F (204°C) and higher temperatures with shorter life expectancy.

Cold flexibility

  • Down to –15°F (–26°C) (some to –40°F (–40°C)).

Fluorocarbon FKM:

  • Mineral oil and grease, low swelling in ASTM oil No. 1, and IRM 902 and IRM 903 oils
  • Non-flammable hydraulic fuels in the group HFD
  • Silicone oil and grease
  • Mineral and vegetable oil and grease
  • Aliphatic hydrocarbons (fuel, butane, propane, natural gas)
  • Aromatic hydrocarbons (benzene, toluene)
  • Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride)
  • Fuels, also fuels with methanol content
  • High vacuum
  • Chlorinated Water
  • Most Agricultural Industry Applications
  • Very good ozone, weather and aging resistance.

Not compatible with:

  • Glycol based brake fluids
  • Ammonia gas, amines, alkalis
  • Superheated steam
  • Low molecular organic acids (formic and acetic acids).


Qty Discounts Prices
  • Model: GV75214
    Dimensions: 1"ID X 1-1/4"OD X 1/8"CS
    Actual: 0.984"ID X 0.139"CS
    Metric: 25mm ID X 3.53mm CS
  • PDF Data Sheet
  • 169 in Stock
Add to Cart:
Min Qty:  2
Copyright © 2023 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719