O-Ring Information

O-Ring Size Chart Chemical Resistance O-Ring Compounds O-Ring Cut Length

Categories

AS568 Standard Inch O-Rings Metric O-Rings - ISO3601 Global O-Rings OSK Assorted O-Ring Kits O-Ring Cord for Versatile and Custom Sealing Solutions Vulcanized O-Rings - Precision Tailored to Your Needs Olypsys® O-Ring Measurement App - How to Properly Measure O-Rings!Hydraulic Seals, Wipers, Rod Seals, Piston Seals, and Wear Rings O-Ring Lubrication Products Oil Seals - Shaft Seals ↪ Simmerring® BABSL AS with Spring ↪ Single Lip No Pressure ↪ TB-H Oil Seals ↪ Type SA Oil Seals ↪ Type SC - Oil Seals ↪ Type SC Metric - Oil Seals ↪ Type TB - Oil Seals ↪ Type TC - Oil Seals ↪ Shaft OD - 0.187" ↪ Shaft OD - 0.25" ↪ Shaft OD - 0.313" ↪ Shaft OD - 0.375" ↪ Shaft OD - 0.434" ↪ Shaft OD - 0.5" ↪ Shaft OD - 0.562" ↪ Shaft OD - 0.585" ↪ Shaft OD - 0.59" ↪ Shaft OD - 0.625" ↪ Shaft OD - 0.688" ↪ Shaft OD - 0.75" ↪ Shaft OD - 0.787" ↪ Shaft OD - 0.813" ↪ Shaft OD - 0.875" ↪ Shaft OD - 0.937" ↪ Shaft OD - 0.938" ↪ Shaft OD - 0.968" ↪ Shaft OD - 0.969" ↪ Shaft OD - 0.984" ↪ Shaft OD - 1" ↪ Shaft OD - 1.062" ↪ Shaft OD - 1.063" ↪ Shaft OD - 1.12" ↪ Shaft OD - 1.125" ↪ Shaft OD - 1.156" ↪ Shaft OD - 1.181" ↪ Shaft OD - 1.187" ↪ Shaft OD - 1.219" ↪ Shaft OD - 1.25" ↪ Shaft OD - 1.28" ↪ Shaft OD - 1.375" ↪ Shaft OD - 1.378" ↪ Shaft OD - 1.437" ↪ Shaft OD - 1.438" ↪ Shaft OD - 1.496" ↪ Shaft OD - 1.5" ↪ Shaft OD - 1.562" ↪ Shaft OD - 1.563" ↪ Shaft OD - 1.565" ↪ Shaft OD - 1.575" ↪ Shaft OD - 1.606" ↪ Shaft OD - 1.625" ↪ Shaft OD - 1.687" ↪ Shaft OD - 1.688" ↪ Shaft OD - 1.719" ↪ Shaft OD - 1.75" ↪ Shaft OD - 1.766" ↪ Shaft OD - 1.781" ↪ Shaft OD - 1.812" ↪ Shaft OD - 1.813" ↪ Shaft OD - 1.875" ↪ Shaft OD - 1.89" ↪ Shaft OD - 1.937" ↪ Shaft OD - 1.938" ↪ Shaft OD - 2" ↪ Shaft OD - 2.005" ↪ Shaft OD - 2.016" ↪ Shaft OD - 2.125" ↪ Shaft OD - 2.165" ↪ Shaft OD - 2.187" ↪ Shaft OD - 2.25" ↪ Shaft OD - 2.313" ↪ Shaft OD - 2.375" ↪ Shaft OD - 2.437" ↪ Shaft OD - 2.5" ↪ Shaft OD - 2.501" ↪ Shaft OD - 2.562" ↪ Shaft OD - 2.625" ↪ Shaft OD - 2.75" ↪ Shaft OD - 2.875" ↪ Shaft OD - 2.938" ↪ Shaft OD - 2.95" ↪ Shaft OD - 3" ↪ Shaft OD - 3.125" ↪ Shaft OD - 3.25" ↪ Shaft OD - 3.375" ↪ Shaft OD - 3.5" ↪ Shaft OD - 3.812" ↪ Shaft OD - 3.938" ↪ Shaft OD - 4" ↪ Type TC Metric - Oil Seals ↪ Type VM Oil Seals ↪ V-Rings ↪ VH-H ↪ Type SB-H Oil Seals ↪ Type PSA Seals OSK™ Air Nailer O-Ring Kits OSK™ Hydraulic Cylinder Seal Kits OSK™ O-Ring Repair Kits OSK™ Sanitary & Brewery Gaskets OSK™ Spray Foam O-Rings for Graco® and PMC OSK™ OEM Replacement O-Rings OSK™ Custom O-Rings & Kits Specials ...Featured Products ...

Information

About Us Shop by Brand Shipping & Returns Privacy Notice Conditions of Use Contact Us Order Status Site Map Newsletter Unsubscribe O-Ring Quotes Made Effortless

Product 9/12

Previous Return to the Product List Next

Return to the Product List

111833TC Type TC Nitrile Oil Seal WAS

(image for) 111833TC Type TC Nitrile Oil Seal WAS

$6.050

Qty Discounts Prices
1-9 $6.050	10-49 $4.680	50+ $3.980

Model: 111833TC
Dimensions: 1.125" Shaft OD X 1.832" Bore ID X 0.312" Seal Width
28.57mm ID X 46.53mm OD X 7.92mm H
19 in Stock

Add to Cart:

1.125" Shaft OD X 1.832" Bore ID X 0.312" Seal Width - Type TC Oil Seal

WAS Seal:

W-shaft seal
A-elastomer outer covering
S-protective lip

Radial shaft seals are used to seal rotating axles and shafts against media from inside or against contaminants from outside. Typical areas of application are drive technology, gearbox construction, electric motors, pumps, agricultural and construction machinery, and the wind power industry.

Good static sealing with low-viscosity or gaseous media
Good resistance to many mineral oils and greases
NBR: 70 Duro General purpose sealing, Air Tools, Hydraulic fluids, Petroleum based oils, fuels, L.P. gases, Cold Water, Silicone greases and oils, Di-ester base lubricants (MIL-L-7808), Ethylene glycol base fluids (Hydrolubes) and Hydraulic Fluids

Operating temperature: -40° to +176°F (-40 to +80°C)

Pressure [MPa (bar)] ≤ 0.05 (0.5)

Inner diameter (d₁)1.125 inch

Outer Diameter (d₂)1.832 inch

Seal width (b)0.312 inch

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719