X-Rings Chemical Resistant Fluorocarbon FKM
The Original X-ring FKM (Fluorocarbon) 75 Durometer
The four-lobed design with a specially developed sealing profile of these seals provides twice the sealing surface of ordinary O-rings. The four-lobed design not only provides lower fiction than an O-ring, but also, due to its square cross section, it resists spiral twist. X-Rings are available in a wide range of elastomer materials for both standard and special applications. Their dimensions are specified with the inside diameter "d1" and the cross-section "W." X-Rings are supplied to the American Standard AS-568A and are completely interchangeable with O-rings in these sizes. They can be used in a variety of static and dynamic sealing applications including rotary, reciprocating or oscillating motion.
- There are two sealing surfaces to give a positive seal with less friction. Due to an improved pressure profile over X-Ring Seal cross-section, a high sealing effect is achieved.
- The recessed mold parting line provides no flash or parting line on the surface of the seal and ensures "zero leakage." What's more, a lubricant reservoir formed between the sealing lips improves performance at start-up.
- The X cross-section resists spiral twisting and extrusion. Due to its special profile, the seal does not tend to twist in the groove during reciprocating movement
- Twice the sealing surface means less radial squeeze is needed to create an effective seal resulting in less friction, less wear and longer service life.
Size not listed, special requirements or large quantities please click this link to Request a Price Quote.