Viton®/FKM Metric O-Rings (Fluorocarbon) 75/80 Duro

Fluorocarbon FKM & Viton® O-Rings: Chemical resistant Fluorocarbon FKM O-Rings exhibit exceptional resistance to chemicals, oils, temperature extremes, low compression set, low gas permeability and excellent aging characteristics. It has a good resistance to ozone, high temperatures, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals.

Metric O-Ring Dimensions are defined by CS Cross Section and ID Inside Diameter. N2.00X012 = 2mm CS X 12mm ID

(image for) 1.0mm CS
1.0mm CS
(image for) 1.1mm CS
1.1mm CS
(image for) 1.2mm CS
1.2mm CS
(image for) 1.3mm CS
1.3mm CS
(image for) 1.5mm CS
1.5mm CS
(image for) 1.6mm CS
1.6mm CS
(image for) 1.78mm CS
1.78mm CS
(image for) 1.8mm CS
1.8mm CS
(image for) 1.9mm CS
1.9mm CS
(image for) 2.0mm CS
2.0mm CS
(image for) 2.2mm CS
2.2mm CS
(image for) 2.4mm CS
2.4mm CS
(image for) 2.5mm CS
2.5mm CS
(image for) 2.62mm CS
2.62mm CS
(image for) 2.65mm CS
2.65mm CS
(image for) 2.7mm CS
2.7mm CS
(image for) 3.0mm CS
3.0mm CS
(image for) 3.1mm CS
3.1mm CS
(image for) 3.53mm CS
3.53mm CS
(image for) 3.5mm CS
3.5mm CS
(image for) 4.0mm CS
4.0mm CS
(image for) 4.5mm CS
4.5mm CS
(image for) 5.0mm CS
5.0mm CS
(image for) 5.33mm CS
5.33mm CS
(image for) 5.7mm CS
5.7mm CS
(image for) 6.0mm CS
6.0mm CS
(image for) 6.99mm CS
6.99mm CS
(image for) 7.0mm CS
7.0mm CS
(image for) 8.0mm CS
8.0mm CS
(image for) 8.4mm CS
8.4mm CS
Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719