Vulcanized EPDM 70 Duro O-Rings

Vulcanized O-Rings up to 48" ID are produced from Class 2 ±0.80% to ±1.00% tolerances and are always visually inspected, PI Taped or Olypsys® Large Format Optical Measured. O-Rings larger than 48" and up are produced from Class 3 +±1.20% to ±1.50% tolerances and are visually inspected and PI Taped.

Olypsys® Measurement Verification Available on O-Rings < 48” (1219mm) OD 

(image for) 0.070" - 1.78mm C/S
0.070" - 1.78mm C/S
(image for) 0.079" - 2mm C/S
0.079" - 2mm C/S
(image for) 0.098" - 2.50mm C/S
0.098" - 2.50mm C/S
(image for) 0.103" - 2.62mm C/S
0.103" - 2.62mm C/S
(image for) 0.118" - 3mm C/S
0.118" - 3mm C/S
(image for) 0.125" - 3.18mm C/S
0.125" - 3.18mm C/S
(image for) 0.139" - 3.53mm C/S
0.139" - 3.53mm C/S
(image for) 0.157" - 4mm C/S
0.157" - 4mm C/S
(image for) 0.210" - 5.33mm C/S
0.210" - 5.33mm C/S
(image for) 0.250" - 6.35mm C/S
0.250" - 6.35mm C/S
(image for) 0.275" - 7mm C/S
0.275" - 7mm C/S
(image for) 0.313" - 7.95mm C/S
0.313" - 7.95mm C/S
(image for) 0.354" - 9mm C/S
0.354" - 9mm C/S
(image for) 0.375" - 9.5mm C/S
0.375" - 9.5mm C/S
(image for) 0.394" - 10mm C/S
0.394" - 10mm C/S
(image for) 0.437" - 11mm C/S
0.437" - 11mm C/S
(image for) 0.500" - 12.7mm C/S
0.500" - 12.7mm C/S
Copyright © 2025 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719