8am-4pm Pacific Mon-Fri | 208-413-6377

Categories


O-Rings


ST024S Solid PTFE Back-Up Ring



$1.27

Quantity Discount Prices
1-98
$1.27
99-328
$1.016
329+
$0.762

  • Model: ST024S
  • 16 in Stock
  • Fits O-Ring Size -024
  • 0.053" W X 1.143"ID X 0.049"HT
  • 1.347mm W X 29.033mm ID X 1.245mm HT

AS568-024 (0.053" W X 1.143"ID X 0.049"HT)

PTFE Back-up Rings are designed to prevent extrusion in rubber O-ring sealing systems. The amount of this extrusion is affected by O-ring hardness, operating temperature, operating pressure and clearance of the mating surface.

Increased Pressure: The use of Back-up Rings should be considered for systems with operating pressure above 2000 PSI. At these pressures the mechanical forces applied to the O-Ring may cause extrusion of the O-ring into the clearance gap.

Operating temperature: The use of Back-up Rings should be considered for elevated temperatures greater than 160°F (71C). The physical and mechanical properties of O-rings may be affected at these temperatures, this increasing the risk of extrusion into the clearance gap.

Industrial Trends: Today's fluid power systems continue to move towards higher pressures and temperatures. PTFE Back-up Rings should be considered as a reliable component to achieve satisfactory system performance