ST023 Single Turn Split PTFE Back-Up Ring



AS568-023 (0.053" W X 1.08"ID X 0.049"HT)

PTFE Back-up Rings are designed to prevent extrusion in rubber O-ring sealing systems. The amount of this extrusion is affected by O-ring hardness, operating temperature, operating pressure and clearance of the mating surface.

Increased Pressure: The use of Back-up Rings should be considered for systems with operating pressure above 2000 PSI. At these pressures the mechanical forces applied to the O-Ring may cause extrusion of the O-ring into the clearance gap.

Operating temperature: The use of Back-up Rings should be considered for elevated temperatures greater than 160°F (71C). The physical and mechanical properties of O-rings may be affected at these temperatures, this increasing the risk of extrusion into the clearance gap.

Industrial Trends: Today's fluid power systems continue to move towards higher pressures and temperatures. PTFE Back-up Rings should be considered as a reliable component to achieve satisfactory system performance

$0.720

Qty Discounts Prices
1-199
$0.720
200-1,399
$0.650
1,400+
$0.360
  • Model: ST023
    Dimensions: Fits O-Ring Size -023
    0.053" W X 1.08"ID X 0.049"HT
    1.347mm W X 27.432mm ID X 1.245mm HT
  • 30 in Stock
Add to Cart:
Copyright © 2022 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719