ST111 Single Turn Split PTFE Back-Up Ring



$1.740

Qty Discounts Prices
1-999
$1.740
1,000-2,499
$1.305
2,500+
$0.870
  • Model: ST111
    Dimensions: Fits O-Ring Size -111
    0.086" W X 0.452"ID X 0.053"HT
    2.185mm W X 11.481mm ID X 1.347mm HT
  • 2,942 in Stock
Add to Cart:

AS568-111 (0.086" W X 0.452"ID X 0.053"HT)

PTFE Back-up Rings are designed to prevent extrusion in rubber O-ring sealing systems. The amount of this extrusion is affected by O-ring hardness, operating temperature, operating pressure and clearance of the mating surface.

Increased Pressure: The use of Back-up Rings should be considered for systems with operating pressure above 2000 PSI. At these pressures the mechanical forces applied to the O-Ring may cause extrusion of the O-ring into the clearance gap.

Operating temperature: The use of Back-up Rings should be considered for elevated temperatures greater than 160°F (71C). The physical and mechanical properties of O-rings may be affected at these temperatures, this increasing the risk of extrusion into the clearance gap.

Industrial Trends: Today's fluid power systems continue to move towards higher pressures and temperatures. PTFE Back-up Rings should be considered as a reliable component to achieve satisfactory system performance

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719