HRU15-1.18-15 Nitrile 80A Homogeneous U-Seal 1-3/16" ID x 1-1/2" OD x 5/32" HT



Qty Discounts Prices
1-24
$2.800
25-1,099
$1.400
1,100-3,499
$0.925
3,500+
$0.740

$2.800

  • Model: HRU15-1.18-15
  • 36 in Stock
Add to Cart:

Homogeneous U-Seals, also known as block vees or U-cups, are single-material, non-loaded seals designed for reliability and low friction performance. The HRU15-1.18-15 is molded from 80 durometer black Nitrile (Buna-N), delivering long-lasting sealing in pneumatic and low-pressure hydraulic systems. These seals provide excellent wear resistance, dependable leak prevention, and can replace O-Rings where space is limited, reducing downtime and maintenance costs.

Operating temperature: -40° to +225°F (–40° to +107°C)

Material & Performance Details

  • Compound: Nitrile (Buna-N) 80 Shore A, black.
  • Performance strengths: Excellent oil resistance, strong abrasion resistance, low compression set.
  • Pressure rating: up to 500 PSI in static and dynamic applications.

Chemical compatibility

  • Excellent resistance to: Petroleum oils, hydraulic oils, water/glycol fluids, silicone greases.
  • Limited capability with: Brake fluids, strong acids, strong oxidizing agents.
  • Not compatible with: Ozone, ketones, chlorinated hydrocarbons.

Sizes & Measurements

  • Inside Diameter (ID): 30.16 mm (1-3/16")
  • Outside Diameter (OD): 38.10 mm (1-1/2")
  • Height (HT): 3.97 mm (5/32")
  • Part Number: HRU15-1.18-15

Applications & Use Cases

HRU homogeneous U-cups are commonly used in:

  • Pneumatic cylinders and actuators
  • Light-duty hydraulic systems
  • Pumps and valves
  • Automotive repair and industrial equipment
  • As an O-Ring replacement in compact designs

Key Specifications

  • Material: Nitrile (Buna-N)
  • Durometer: 80 Shore A
  • Color: Black
  • Certifications: Available upon request (lot traceability, ISO compliance)
  • Temperature range: -40° to +225°F (–40° to +107°C)
  • Pressure rating: up to 500 PSI

Why Buy from The O-Ring Store LLC

  • ISO9001:2015 certified quality processes
  • USA stock for fast delivery
  • Same-day shipping on in-stock items
  • Custom sizes available
  • Full lot traceability & documentation on request
  • Expert technical support from experienced staff
  • Competitive pricing with no compromise on quality

FAQs

Q1: What is the main advantage of a homogeneous U-Seal compared to an O-Ring?
A homogeneous U-Seal provides lower friction, better dynamic sealing, and longer service life in pneumatic and light hydraulic applications.

Q2: Can this seal handle high pressure?
It is rated up to 500 PSI. For higher pressures, a loaded U-cup or double-lip seal is recommended.

Q3: Is this seal available in materials other than Nitrile?
Yes. Homogeneous U-Seals are also available in Viton® (FKM), Neoprene, and other elastomers for specialized chemical or temperature resistance.