AS568-244 C70 Neoprene (Polychloroprene) 70 Duro O-Rings



$0.970

Qty Discounts Prices
10-699
$0.970
700-1,999
$0.689
2,000+
$0.482
  • Model: C70244
    Dimensions: 4-1/4"ID X 4-1/2"OD X 1/8"CS
    Actual: 4.234"ID X 0.139"CS
    Metric: 107.54mm ID X 3.53mm CS
  • PDF Data Sheet
  • 30 in Stock
Add to Cart:
Min Qty:  10

O-ring Size: 4 1/4"ID X 4 1/2"OD X 1/8"CS

Neoprene O-Rings:

The first synthetic rubber developed commercially, introduced in 1931, exhibits generally good ozone, aging and chemical resistance. It has good mechanical properties over a wide temperature range. Vulcanizates of chloroprene display little significant change after prolonged outdoor exposure. Because of its chlorine content, flame resistance is superior to that of most other rubbers. Neoprene vulcanizates, especially O-Rings, sometimes exhibit distortion due to crystallization of the rubber at room temperature. This effect can be completely reversed by warming the parts in low heat. Neoprene is especially well suited to rubber-to-metal bonding.

Chemical Resistance:

  • Paraffin base mineral oil with low DPI, e.g. ASTM oil No. 1
  • Silicone oil and grease
  • Water and water solvents at low temperatures
  • Refrigerants
  • Freon, 113, 114, 114B2, 13, 22, 31, 32, 502 (F22+F316), C318, and TF
  • Ammonia
  • Carbon dioxide
  • Improved ozone, weathering and aging resistance compared with nitrile rubber.

Limited Compatibility:

  • Naphthalene based mineral oil (IRM 902 and IRM 903 oils)
  • Low molecular aliphatic hydrocarbons (propane, butane, fuel)
  • Glycol based brake fluids.

Not Compatible With:

  • Aromatic hydrocarbons (benzene)
  • Chlorine, Wet
  • Chlorinated hydrocarbons (trichloroethylene)
  • Brake Fluid
  • Gasoline
  • Polar solvents (ketones, esters, ethers, acetones).

Operating temperature: -40° to +225°F

Copyright © 2024 The O-Ring Store, LLC
1847 Wilma Dr, Clarkston WA 99403
Phone 208-413-6377 - Fax 208-413-6719