H-0750 3/4" Polyurethane 95A H Style Snap-In Rod Wiper Seal



Qty Discounts Prices
1-9
$8.080
10-99
$6.470
100+
$5.660

$8.080

  • Model: H-0750
    Dimensions: 3/4" Rod x 1.062" Groove Diameter x 0.203" Height
    Actual: 0.750" Rod x 1.062" Groove Diameter x 0.203" Height
    Metric: 19.05mm Rod x 26.97mm Groove Diameter x 5.16mm Height
  • 100 in Stock
Add to Cart:

Dimensions: 3/4" Rod x 1.062" Groove Diameter x 0.203" Height

The H-0750 is a 3/4" H style snap-in rod wiper seal made from blue 95 Shore A thermoplastic polyurethane (TPU). It fits a 0.750" (19.05mm) rod and a 1.062" (26.97mm) groove diameter with a 0.203" (5.16mm) height. The H-0750 is the Dichtomatik AD48 double wiper from Freudenberg Sealing Technologies, built to keep dirt out of hydraulic cylinders running from -22 to +212F (-30 to +100C).

Keep dirt out of your cylinder and keep your rod seal alive longer with the H-0750 H style rod wiper. Most rod seals do not wear out on their own. They get chewed up by grit that rides in on the rod. The H-0750 has a protruding outer lip that scrapes mud, dust and chips off a 3/4" rod on every retract stroke, before any of it reaches the rod seal or the oil.

The H-0750 is a double wiper, so it does a second job too. An inner lip faces the oil side and trims down the thin film of oil the rod carries out past the rod seal. That means a drier rod and less mess on the outside of the cylinder. It is one solid piece of polyurethane with no metal ring, so it snaps into the groove by hand with no press tools. Maintenance crews, cylinder rebuild shops and OEMs get the H-0750 from The O-Ring Store LLC along with real help picking the right wiper.

Operating Temperature: -22 to +212F (-30 to +100C)

Material and Performance

The H-0750 rod wiper is molded from thermoplastic polyurethane, also called TPU or urethane, in Dichtomatik compound 95 TPU O7FL91PU. It is blue and measures 95 Shore A, which is hard and tough for a seal material. That hardness is what gives the H-0750 its high wear resistance and long service life in dirty work. A softer rubber wiper will tear or wear flat where a 95 durometer polyurethane wiper keeps its scraping edge. The H-0750 is rated for rod speeds up to 1 m/s (3.3 ft/s).

  • Excellent resistance to: mineral oil based hydraulic fluids, petroleum oils and greases, abrasion, dirt and grit, ozone and weather
  • Limited capability with: warm water, water based hydraulic fluids and long exposure to hot humid air
  • Not compatible with: steam, hot water, glycol brake fluids, ketones, strong acids and strong alkalis

Sizes and Measurements

  • Dimensions: 3/4" Rod x 1.062" Groove Diameter x 0.203" Height
  • Actual: 0.750" Rod x 1.062" Groove Diameter x 0.203" Height
  • Metric: 19.05mm Rod x 26.97mm Groove Diameter x 5.16mm Height
  • Part Number: H-0750
  • Style: H style snap-in double lip rod wiper, Dichtomatik profile AD48
  • Cross-references: Dichtomatik AD48 0.750 x 1.062 x 0.203 in (19,05 x 26,97 x 5,1 mm) in 95 TPU O7FL91PU, industry H style wiper for a 3/4" (19.05mm) rod

Applications and Use Cases

The H-0750 polyurethane rod wiper is built for hydraulic cylinders with a 3/4" rod that work in heavy contamination. That covers mobile hydraulics like loaders, skid steers, farm equipment, log splitters, dump hoists and truck mounted cylinders, plus general industrial cylinders in dusty or muddy plants. It installs in an axially semi-closed groove, which is the standard snap-in wiper groove. For the H-0750 to seat and wipe right, the groove base and the rod should have a surface finish of Ra 0.4 micrometers (about 16 microinches) or smoother, and the groove side walls Ra 4 micrometers (about 157 microinches) or smoother. Break all sharp edges, clean out the groove and put a light coat of grease on the wiper and the groove before you snap it in.

Key Specifications

  • Material: Thermoplastic Polyurethane (TPU), compound O7FL91PU
  • Durometer: 95 Shore A
  • Color: Blue
  • Temperature Range: -22 to +212F (-30 to +100C)
  • Maximum Rod Speed: 1 m/s (3.3 ft/s)
  • Design: Double-acting, protruding wiper lip, no metal ring
  • Groove Type: Axially semi-closed snap-in groove
  • Storage: Below 77F (25C), dry, away from direct heat and ozone

Why Buy from The O-Ring Store LLC

The O-Ring Store LLC is an ISO 9001:2015 certified distributor and a Freudenberg preferred distributor with USA-based stock for fast delivery. Most in-stock items ship the same day. We offer full lot traceability and documentation on request, and technical support from people with decades of sealing experience who will help you match a wiper to your rod, your groove and your rod seal. Every order is verified through our Olypsys® scan-based quality system before it ships. Fair pricing with no compromise on quality. We make getting O-Rings easy!

Frequently Asked Questions

Q: What size rod and groove does the H-0750 rod wiper fit?
A: The H-0750 H style rod wiper fits a 3/4" (0.750", 19.05mm) rod and a 1.062" (26.97mm) groove diameter, with a 0.203" (5.16mm) height. It snaps into an axially semi-closed groove by hand and has no metal ring to press in.

Q: Can the H-0750 double wiper be used as the rod seal?
A: No. The H-0750 is a 95 Shore A polyurethane wiper, not a pressure seal, and it needs a real rod seal behind it. Its inner lip only trims the thin oil film left on a 3/4" rod. Freudenberg recommends a pressure relief hole between the rod seal and the wiper so trapped oil can drain back instead of building up and pushing the wiper out of its groove.

Q: What temperature and rod speed can the H-0750 polyurethane wiper handle?
A: The H-0750 TPU rod wiper runs from -22 to +212F (-30 to +100C) at rod speeds up to 1 m/s (3.3 ft/s). It is the right pick for mineral oil hydraulics in dirty conditions. It is the wrong pick for steam or hot water, which break polyurethane down over time.