PU375-3.750-500 Polyurethane Piston Seal | 4.500" OD x 3.750" ID



Qty Discounts Prices
32-49
$16.850
50-124
$10.530
125-374
$8.410
375+
$6.730

$16.850

  • Model: PU375-3.750-500
    Dimensions: 4-1/2" OD X 3-3/4" ID X 1/2" H
    4.500" OD X 3.750" ID X 0.500" H
    114.30mm OD x 95.25mm ID x 12.70mm H
  • 0 in Stock
Add to Cart:
Min Qty:  32

Keep hydraulic cylinders sealing reliably with the PU375-3.750-500 92 AU 9250 PI Piston Seal, a high-performance polyurethane U-ring seal designed to help prevent internal leakage, maintain pressure, and reduce equipment downtime. Built for hydraulic piston applications, this seal supports dependable motion control in demanding industrial, mobile, and fluid power systems.

Manufactured from 92 durometer AU 9250 polyurethane in a natural polyurethane color, this PI series piston seal provides excellent wear resistance, extrusion resistance, and sealing stability where hydraulic pressure, reciprocating movement, and long service life matter most.

Operating Temperature

Operating temperature: -40° to +225°F (–40° to +107°C)

Material & Performance Details

The PU375-3.750-500 PI piston seal is made from AU 9250 polyurethane, a tough 92 Shore A urethane compound commonly used in hydraulic sealing because it combines high tensile strength, abrasion resistance, and low compression set with reliable sealing under pressure. Polyurethane piston seals are especially valuable in hydraulic cylinders where oil resistance, durability, and resistance to dynamic wear are required.

Chemical compatibility:

  • Excellent resistance to: petroleum-based hydraulic fluids, mineral oils, lubricating oils, greases, aliphatic hydrocarbons, and abrasion-heavy hydraulic environments.
  • Limited capability with: water-glycol fluids, some phosphate ester fluids, mild acids, mild bases, and applications with elevated heat or aggressive fluid blends.
  • Not compatible with: strong acids, strong alkalis, ketones, chlorinated solvents, aromatic solvents, brake fluids, and applications requiring broad high-temperature chemical resistance.

Sizes & Measurements

  • Cross Section (CS): 0.375 in / 9.53 mm
  • Inside Diameter (ID): 3.750 in / 95.25 mm
  • Outside Diameter (OD): 4.500 in / 114.30 mm
  • Axial Height / Width: 0.500 in / 12.70 mm
  • Part Number: PU375-3.750-500
  • Profile Cross References: PI, U-ring seal series PI, PU piston U-seal profile
  • Dimensional Cross Reference: 4.500 x 3.750 x 0.500 in / 114.30 x 95.25 x 12.70 mm
  • Material Cross Reference: 92 AU 9250 polyurethane

Applications & Use Cases

This 92 AU 9250 polyurethane PI piston seal is designed for hydraulic piston sealing in equipment that requires strong leakage control, long wear life, and pressure retention. It is commonly used in hydraulic cylinders, industrial machinery, mobile hydraulic equipment, agricultural equipment, construction equipment, presses, lifts, pumps, valves, and fluid power systems. Its U-ring piston seal design helps maintain separation between pressure chambers while supporting smooth reciprocating movement.

Key Specifications

  • Material: Polyurethane, AU 9250
  • Durometer: 92 Shore A
  • Color: Natural polyurethane
  • Seal Type: Hydraulic piston seal
  • Profile: PI U-ring seal series
  • Cross Section: 0.375 in / 9.53 mm
  • Inside Diameter: 3.750 in / 95.25 mm
  • Outside Diameter: 4.500 in / 114.30 mm
  • Height / Width: 0.500 in / 12.70 mm
  • Temperature Range: -40° to +225°F / –40° to +107°C
  • Pressure Rating: Application-dependent; commonly used in hydraulic cylinder sealing applications.
  • Certifications: No special certifications specified for this item.

Why Buy from The O-Ring Store LLC

When you buy the PU375-3.750-500 92 AU 9250 PI Piston Seal from The O-Ring Store LLC, you get more than a replacement seal. You get dependable product support, fast access to USA inventory, and quality-focused service from a supplier that understands hydraulic sealing requirements.

The O-Ring Store LLC supports customers with ISO9001:2015 certified quality processes, USA stock for fast delivery, same-day shipping on in-stock items, and custom sizes available for special sealing needs. Full lot traceability and documentation are available on request, and experienced technical staff can help with material selection, sizing, and cross-reference support. You get competitive pricing without compromising quality, making The O-Ring Store LLC a trusted source for hydraulic piston seals, O-rings, U-cups, and specialty sealing products.

FAQs

What is the PU375-3.750-500 PI piston seal used for?
The PU375-3.750-500 is used for hydraulic piston sealing in cylinders and fluid power equipment. It helps prevent internal leakage, maintain hydraulic pressure, and support reliable reciprocating movement.

What material is 92 AU 9250?
92 AU 9250 is a 92 Shore A polyurethane compound. It is commonly selected for hydraulic seals because it offers strong abrasion resistance, good oil resistance, and excellent durability in dynamic sealing applications.

Is this the same as an AS568 O-ring?
No. This part is a hydraulic piston U-ring seal, not a standard AS568 O-ring. The AS568 dash number is not applicable, but the seal includes cross-reference dimensions of 4.500 x 3.750 x 0.500 in / 114.30 x 95.25 x 12.70 mm.