Surface Insensitive Cyanoacrylate Adhesive - 100 cp 2 Gram

Designed Perfectly for All O-Ring Rubber Applications

Turbo Fuse Surface Insensitive Cyanoacrylate Adhesive is designed to bond difficult materials substrates. Gives you extra bonding capabilities with Plastic, FKM, Silicone, Buna-N and EPDM Rubber. Turbo Fuse Surface Insensitive will give you a slightly faster curing speed of 3-6 seconds and a full fixture time of 24 hours.

Turbo Fuse Series 130SI – (100 Viscosity)

• Surface Insensitive Cyanoacrylate Adhesive
• Viscosity: 100cp
• Gap Fill: .006"
• Tensile Shear Strength: 3,200 psi
• Temperature Range: -65°F to 180°F
• Cure Speed: Fixture - 6 sec.; Full - 24 hrs

Material Safety Data Sheet (MSDS)

Cyanoacrylate Adhesive Shelf Life

When cyanoacrylates are maintained at a temperature of about 55°F prior to opening in a cool, dry location such as a refrigerator, the shelf life will be extended to a minimum of 15 months. If the product is to be used within six months of the production date, it is not necessary to refrigerate.

Keep in mind that cyanoacrylates are a moisture sensitive product, and placing them in cool, then hot temperatures will create condensation. After removing the products from the refrigerator, it is best to let them sit until they reach room temperature.

When cyanoacrylates are not refrigerated, the shelf life will be reduced to approximately a one-year period. Our products have a production date coded on all of our containers.

After the Container Has Been Opened

We recommend after the container is opened, the product be used within thirty days. Once the container is open, to maintain the life of the product, the cyanoacrylate should not be refrigerated.