Metric O-Rings - Cross Section "CS" X Inside Diameter "ID"
Metric EPDM O-Rings in 70 durometer black sulfur-cured rubber are a reliable sealing solution for applications involving water, steam, glycol-based brake fluids, and phosphate ester hydraulic systems. Known for their affordable cost, high tear resistance, and excellent abrasion performance, sulfur-cured EPDM is a trusted choice where durability and long service life matter.
These O-Rings are valued across multiple industries for their resistance to ozone, weathering, and polar fluids, making them ideal for outdoor, municipal, and appliance sealing applications. By choosing EPDM, you gain dependable protection against leaks, reduced downtime, and proven performance in demanding environments.
Operating temperature: -65° to +300°F (–54° to +149°C)
(up to +400°F (+204°C) in water and steam applications)
Material & Performance Details
EPDM (Ethylene Propylene Diene Monomer) is an elastomer designed for superior sealing in hot water, steam, and aggressive polar fluids. Sulfur-cured EPDM is the most cost-effective grade and provides improved tear and abrasion resistance compared to peroxide-cured compounds.
- Compound: EPDM (Ethylene Propylene Diene Monomer)
- Durometer & Color: 70 Shore A, Black
- Cure System: Sulfur-cured (Non-FDA)
- Key Strengths: Ozone resistance, weathering stability, polar fluid compatibility, and long-lasting sealing reliability
Chemical Compatibility:
- Excellent resistance to:
- Hot water & steam (to +300°F / +149°C; special grades to +400°F / +204°C)
- Glycol-based brake fluids
- Phosphate ester hydraulic fluids (HFD-R)
- Polar solvents (alcohols, ketones, esters)
- Many organic & inorganic acids
- Cleaning agents, soda & potassium alkalis
- Silicone oils & greases
- Ozone, aging, and weathering
- Limited capability with:
- Some concentrated acids and aggressive blends
- Not compatible with:
- Mineral oils & petroleum-based fluids
- Gasoline, diesel, kerosene, LPG
- Aromatic hydrocarbons
- Lubricating oils, greases, and solvents
Sizes & Measurements
Each Metric EPDM O-Ring is specified by: Cross Section "CS" X Inside Diameter "ID"
- Cross Section (CS): millimeters (inches)
- Inside Diameter (ID): millimeters (inches)
- Outside Diameter (OD): millimeters (inches)
- Part Number: Metric O-Ring identifier 1.00X009 example of CS X ID
- AS568 Dash Number: Not applicable (metric sizing standard) See: O-Ring Size Chart
Applications & Use Cases
Sulfur-cured Metric EPDM O-Rings are widely used across industries where petroleum resistance is not required, but long-term durability in polar fluids and weathered environments is essential. Typical uses include:
- Municipal water and wastewater systems
- Household and industrial appliances
- Hydraulic systems with phosphate ester fluids
- Brake systems using glycol-based fluids
- Steam-handling equipment
- Electrical insulators
- Outdoor and weather-exposed sealing applications
- Low-temperature environments requiring elasticity in extreme cold
Key Specifications
- Material: EPDM (Ethylene Propylene Diene Monomer)
- Durometer: 70 Shore A
- Color: Black
- Cure System: Sulfur-cured
- Certifications: None (Not FDA compliant)
- Temperature Range: -65° to +300°F (–54° to +149°C); up to +400°F (+204°C) in water/steam
- Pressure Ratings: Application-dependent (consult engineering specifications)
Major Differences Between Sulfur-Cured and Peroxide-Cured EPDM
Cost & Availability
- Sulfur-Cured EPDM:
Lower cost, more widely available.
The standard, economical choice for EPDM seals. - Peroxide-Cured EPDM:
Higher cost.
Specialty curing method, often required for FDA, NSF, and medical-grade seals.
Mechanical Properties (Strength & Wear)
- Sulfur-Cured EPDM:
Better tear strength and abrasion resistance.
Great for dynamic sealing, outdoor use, and environments with mechanical stress. - Peroxide-Cured EPDM:
Lower tear/abrasion resistance.
More suited for static seals and chemically demanding environments rather than abrasive ones.
Chemical & Thermal Resistance
- Sulfur-Cured EPDM:
Good resistance to hot water, steam (up to 300°F / 149°C, special grades 400°F / 204°C), brake fluids, phosphate esters, ozone, and weathering.
More limited resistance to aggressive oxidizers, acids, and chloramines. - Peroxide-Cured EPDM:
Superior resistance to hot water, steam, acids, chloramines, and many aggressive chemicals.
Higher thermal stability — better at holding up under long-term heat and chemical exposure.
Compression Set (Seal Life Under Load)
- Sulfur-Cured EPDM:
Moderate compression set.
Good general service, but not the best for very long-term compression resistance. - Peroxide-Cured EPDM:
Lower compression set.
Longer-lasting sealing under high temperatures or continuous compression.
Regulatory Compliance
- Sulfur-Cured EPDM:
Not FDA or NSF compliant.
Best for industrial, municipal, and automotive use. - Peroxide-Cured EPDM:
Often FDA, NSF, or USP Class VI certified.
Preferred for food, beverage, pharmaceutical, and medical applications.
Quick Summary for Sales & Customers
- Sulfur-Cured EPDM = Best choice for industrial, automotive, municipal, outdoor applications. Stronger mechanically, cheaper, but not FDA/NSF.
- Peroxide-Cured EPDM = Best choice for food, medical, or chemical-heavy environments. Chemically tougher, more heat-resistant, FDA/NSF compliant, but more expensive and less abrasion-resistant.
Why Buy from The O-Ring Store LLC
When you buy from The O-Ring Store LLC, you gain more than just a seal. Our customers trust us because we provide:
- ISO9001:2015 certified quality processes
- Large USA-based inventory for fast delivery
- Same-day shipping on most in-stock O-Rings
- Custom sizes and compounds available on request
- Full lot traceability and documentation upon request
- Expert technical support from an experienced team
- Competitive pricing without sacrificing quality
We make getting O-Rings easy.