AS568-001-1/2 E70 EPDM Non-FDA O-Ring 70 Duro Black

1/16"ID X 1/8"OD X 1/32"CS

Non-FDA Compliant EPDM O-Rings:

Normally used with foods, water, steam applications, phosphate ester type hydraulic fluids, brake fluids and offer great resistance to ozone and weathering. Sulfur-Cured FDA Grade EPDM is the least costly and provides the best tear and abrasion resistance compared to Peroxide-Cured Systems. EPDM's are not used with petroleum oils or fuels because significant swelling would result.

Chemical Resistance and Uses:

• Hot water and steam up to 300°F (149°C) with special compounds up to 400°F (204°C)
• Various Water / Municipalities Applications
• Household Appliances
• Glycol based brake fluids up to 300°F (149°C)
• Many organic and inorganic acid
• Cleaning agents, soda and potassium alkalis
• Phosphate-ester based hydraulic fluids (HFD-R)
• Silicone Oil and Grease
• Many polar solvents (alcohols, ketones, esters)
• Ozone, aging and weather resistant
• Outdoor Applications
• Electrical Insulators
• EPDM rubber is used in extreme cold environment applications

EPDM is not recommended for:

• Mineral oil products (oils, greases and fuels)
• Solvents
• Aromatic Hydrocarbons.
• Liquefied Petroleum Gas (LPG)
• Lubricating Oils, Petroleum Base
• Gasoline

Compound Info:

• Ethylene Propylene, EPDM, or EP (EP)
• Color: Black
• Duro: 70
• FDA: No.
• ASTM D2000 Grade M5CA710 A25 B35 C32 EA14 F17 G21

Operating temperature: -65° to +300°F

• (max. 400°F (204°C) in water and/or steam)