AN6226-08 Buna-N 70 U-Cup Seal 1/4" ID X 3/4" OD X 1/4" CS


Qty Discounts Prices
10-229
$0.440
230-6,499
$0.219
6,500-19,999
$0.153
20,000+
$0.122

$0.440

  • Model: 6226-08
    Dimensions: 1/4" ID X 3/4" OD X 1/4" CS
    Actual: 0.250" ID X 0.750" OD X 0.250" CS
    Metric: 6.35 mm ID X 19.05 mm OD X 6.35 mm CS
  • 414 in Stock
Add to Cart:
Min Qty:  10

The AN6226-08 U-Cup is manufactured from 70 durometer Nitrile (Buna-N) and conforms to the Army-Navy AN6226 specification. Engineered for dynamic sealing, this U-cup provides dependable low-pressure hydraulic and pneumatic sealing up to 500 PSI. Common in cylinders, actuators, and industrial equipment, its flexible lips seal against both dynamic and static surfaces, making it an ideal solution for reciprocating motion.

Choose The O-Ring Store LLC for industry-leading value-added services including:

  • Olypsys® AI-Verified Inspection
  • In-house vulcanization
  • Custom kitting and labeling
  • ISO 9001:2015 Certified Quality Management
  • Dedicated B2B customer support
  • Certifications upon request: TORS CofC, MFG CofC, Material Certs (per SOP)

Dimensions:

  • Inside Diameter (I.D.): 0.250" (1/4")
  • Outside Diameter (O.D.): 0.750" (3/4")
  • Cross Section (C.S.): 0.250" (1/4")

Recommended Groove Dimensions (per AN6226 Specification):

  • Groove Diameter (Bore): 0.755" ± 0.005"
  • Groove Width: 0.282" ± 0.003"
  • Rod Diameter: 0.250"
  • Groove Depth: 0.270" typical

Operating temperature: -40° to +212°F (–40° to +100°C)

Choose The O-Ring Store LLC for industry-leading value-added services including:

  • Olypsys® AI-Verified Inspection
  • In-house vulcanization
  • Custom kitting and labeling
  • ISO 9001:2015 Certified Quality Management
  • Dedicated B2B customer support
  • TORS CofC

Key Features:

  • Made from NBR (Buna-N) 70 Shore A hardness
  • Rated to 500 PSI dynamic sealing
  • Excellent resistance to:
    • Petroleum-based oils
    • Hydraulic fluids (H, HL, HLP types)
    • Lubricating greases
  • Limited compatibility with:
    • Water up to +80°C
    • Flame-resistant fluids (HFA, HFB, HFC) to +60°C
  • Not recommended for:
    • Aromatic/chlorinated hydrocarbons
    • Fuels with high aromatic content
    • Glycol-based brake fluids
    • HFD hydraulic fluids
  • This seal is cross-referenced and compatible with:
    • Parker Hannifin: 42956226-08
    • Hercules: 870-08
    • Martin Fluid Power: 6226-08
    • Precision Associates: 6226-8